Thor Tools 4" ReShine™ Diamond Restoration Polishing Pads

Thor Tools 4" ReShine™ Diamond Restoration Polishing Pads

For Purpose Of Restoration On Granite, Marble, Limestone & Concrete Surfaces.

Thor Tools brings ReShine™ diamond polishing pads for purpose of maintenance and restoration on granite, marble, limestone and concrete surfaces with 3 steps maximum.

ReShine™ Diamond polishing pads are designed for wet polishing. it does not need a lot of water but a little.

If the surface is lightly wet, it can be enough to cool the cutting edge for a successful application, without having to use final polishing pads or acidic polishing powders and/or chemicals.

The Thor Tools® ReShine™ diamond polishing pads are best choice for polishing marble and limestone that is difficult to polishing finish, such as nero maquina (black marble) and concrete countertops relatively softer than other stones for commercial application.

The Thor Tools® ReShine™ diamond polishing pads can work on a typical floor buffer with 175 rpm or 300 rpm. the ReShine™ diamond polishing pads come with a velcro back so that the ReShine™ diamond polishing pads can be held on the most popular backer pads easily.

The minimum quantity for floor polisher/buffer application is 3 pieces per driver pad, but 4 or more can be installed for larger size driver pads.

The Thor Tools® ReShine™ diamond polishing pads can also work on standard handheld wet polisher or dry polisher. although ReShine™ wet polishing pad is designed for wet polishing and little water is needed on the surface, a standard handheld dry polisher with a spray bottle can meet the requirement.

Another choice, you can use dual-action sander to keep the surface flat with a water spray gun.

Specifications:

• Size: 4 Inch 100mm
• Stone Grit: #1, #2, #3