Skip to content
Betontools is offering Free Delivery and Free Insurance to most areas AUS-Wide, when you spend over $199 T&C's Apply! Call 1800 238 668
Betontools is offering Free Delivery and Free Insurance to most areas AUS-Wide, when you spend over $199 T&C's Apply! Call 1800 238 668

Trowel Blades and Pans

Power trowels are must-have tools for anyone who works with concrete. While hand trowels are fine for do-it-yourselfers and laying concrete in small spaces, walk behind and ride-on power trowels are necessary for achieving flatness and productiveness. The right trowel machine blades are just as important as any of the tools you use. The blade you use depends on the phase of the job you are performing. The options for power trowels are float blades, float pans, and combination blades....

Power Trowel Float Blades

Floating occurs after the bleed water dissipates. The floating process removes bumps and fills valleys while also compacting the concrete. This is accomplished by using specially designed power trowel float blades. Float blades are made from low-carbon steel and are always in a completely flat position. This type of blade has a slight bend on all four sides to prevent digging into the concrete.

Power Trowel Combo Blades

Power trowel combo blades are made from high-carbon steel. These blades are used for both floating and finishing. The blades are smaller than float blades and larger than finishing blades.

During the finishing pass, the blade is run flat to further level the concrete surface. During finishing, the trailing edge is flat to give the concrete a hard, smooth finish. One advantage a finishing blade has over a combo blade is that it has two edges for wearing. The combination blade can’t be reversed once the blade is worn.

Combination and finish power trowel blades come in a range of thicknesses. They also come in a range of steel types that work better on either walk behind or ride-on trowel machines. The life expectancy of the blade determines whether your choice is the most cost-effective for your needs.

Plastic Trowel Blades

Once the concrete sets and tightens, steel blades will leave black marks on the surface. This is especially unacceptable for exposed concrete floors. Plastic trowel blades offer an alternative that doesn’t cause the same results. You can purchase plastic combination and finish style blades. Plastic finish blades allow you to eliminate the risk of leaving burnish marks on concrete or epoxy while still providing a hard-polished finish.

Why Shop for Trowel Machine Blades at Beton Tools

Beton Tools is an Australian importer and distributor of high-quality concrete and construction tools and products. We have the products you can rely on for professional results of construction and DIY projects. With more than 20,000 times to choose from, we have everything you need for your work, hobby, or a single project. If you need help finding something, Contact us for more information.

Filters

$
$

Nela Tools Black Edition Edge Spatula

Nela Tools
Original price $28.00 - Original price $116.00
Original price
$28.00 - $116.00
$28.00 - $116.00
Current price $28.00  +GST
Low stock

Nela’s finishing spatula is a new and dynamic tool developed to advance and intensify the overall plastering process. A flexible stainless steel b...

View full details
Original price $28.00 - Original price $116.00
Original price
$28.00 - $116.00
$28.00 - $116.00
Current price $28.00  +GST

Barikell Trowel Blade - Edger 30inch 6 Bladed PK6 4220

Thor Tools
Original price $130.00 - Original price $130.00
Original price
$130.00  +GST
$130.00 - $130.00
Current price $130.00  +GST
In stock

Trowel Blades Finishing 42206-75 To suit 6 Bladed Edging Machine Only Barikell Moskito 75 – 30 Inches 6 Blades Masterfinish 6 Blades MF430-6 Ox To...

View full details
Original price $130.00 - Original price $130.00
Original price
$130.00  +GST
$130.00 - $130.00
Current price $130.00  +GST

Nela Tools Prem MediFLEX Stainless Trowel

Nela Tools
Original price $56.00 - Original price $132.00
Original price
$56.00 - $132.00
$56.00 - $132.00
Current price $56.00  +GST
In stock

NELA Prem MediFLEX Stainless Trowel Features: Perfect for burr-free fillings thanks to lightly rounded edges and versatile double-blade technology...

View full details
Original price $56.00 - Original price $132.00
Original price
$56.00 - $132.00
$56.00 - $132.00
Current price $56.00  +GST

Nela Tools 80x50 / 50mm Corner Plastic Trowel 90°

Nela Tools
Original price $38.00 - Original price $38.00
Original price
$38.00  +GST
$38.00 - $38.00
Current price $38.00  +GST
In stock

NELA 80x50 / 50mm Corner Plastic Trowel 90°

Original price $38.00 - Original price $38.00
Original price
$38.00  +GST
$38.00 - $38.00
Current price $38.00  +GST

Nela Tools 125x100 / 100mm Corner Plastic Trowel 90°

Nela Tools
Original price $38.00 - Original price $38.00
Original price
$38.00  +GST
$38.00 - $38.00
Current price $38.00  +GST
In stock

NELA 125x100 / 100mm Corner Plastic Trowel 90°

Original price $38.00 - Original price $38.00
Original price
$38.00  +GST
$38.00 - $38.00
Current price $38.00  +GST

Nela Tools Plasticflex Trowel Range

Nela Tools
Original price $50.60 - Original price $84.00
Original price
$50.60 - $84.00
$50.60 - $84.00
Current price $50.60  +GST
Low stock

BiKoGrip CORK. Ergonomically perfect handle design. Ultra-lightweight aluminium mounting made of a robust special alloy: for ultra-high stability a...

View full details
Original price $50.60 - Original price $84.00
Original price
$50.60 - $84.00
$50.60 - $84.00
Current price $50.60  +GST

Marco Pesaro Stainless All Sides Up Trowels

Marco Pesaro
Original price $41.66 - Original price $41.66
Original price
$41.66  +GST
$41.66 - $41.66
Current price $41.66  +GST
In stock

Marco Pesaro All Sides Up Trowels – Plastic Made from long-wearing stainless steel blade Ergonomic plastic handle Handle: Plastic Material: Stainl...

View full details
Original price $41.66 - Original price $41.66
Original price
$41.66  +GST
$41.66 - $41.66
Current price $41.66  +GST

Marco Pesaro Plaster Hawk Soft Handle

Marco Pesaro
Original price $31.29 - Original price $36.00
Original price
$31.29 - $36.00
$31.29 - $36.00
Current price $31.29  +GST
In stock

Marco Pesaro Hawks Strong 6 rivet construction Sponge rubber hand guard Comfort grip handle Material: Aluminium Size: Available in 305x305, 330x330

Original price $31.29 - Original price $36.00
Original price
$31.29 - $36.00
$31.29 - $36.00
Current price $31.29  +GST

NELA 200x50mm Venetian Round Front Trowel - 0415

Nela Tools
Original price $70.00 - Original price $70.00
Original price
$70.00  +GST
$70.00 - $70.00
Current price $70.00  +GST
In stock

NELA Venetian Round Front Trowel 200x50mm

Original price $70.00 - Original price $70.00
Original price
$70.00  +GST
$70.00 - $70.00
Current price $70.00  +GST

NELA 280x130x3mm Clear Blade Plastic Float - Round Edges - 0119

Nela Tools
Original price $20.00 - Original price $20.00
Original price
$20.00  +GST
$20.00 - $20.00
Current price $20.00  +GST
In stock

Features: NELA Plastic Float Round Edges Clear Blade Dimension: 280x130x3mm

Original price $20.00 - Original price $20.00
Original price
$20.00  +GST
$20.00 - $20.00
Current price $20.00  +GST

Nela Tools Butterfly Trowel

Nela Tools
Original price $28.00 - Original price $68.00
Original price
$28.00 - $68.00
$28.00 - $68.00
Current price $28.00  +GST
In stock

NELA Finishing Spatula – Butterfly Trowel – cork handle Features: Spatula with Aluminium back Straight Cork Handle Stainless Steel Blade Thickness...

View full details
Original price $28.00 - Original price $68.00
Original price
$28.00 - $68.00
$28.00 - $68.00
Current price $28.00  +GST

Nela Tools Carbon Trowels

Nela Tools
Original price $51.00 - Original price $90.00
Original price
$51.00 - $90.00
$51.00 - $90.00
Current price $51.00  +GST
Low stock

Features: Carbon Steel Finishing Trowel Thickness of the blade 0.67 mm Available Sizes 280x120mm 305x120mm 330x120mm 355x120mm 405x120mm 508x120...

View full details
Original price $51.00 - Original price $90.00
Original price
$51.00 - $90.00
$51.00 - $90.00
Current price $51.00  +GST

Flextool Trowel Blade Finish 150X325MM (4PK) FT-D34-3 FT201823-UNIT

Flextool
Original price $51.50 - Original price $51.50
Original price
$51.50  +GST
$51.50 - $51.50
Current price $51.50  +GST
In stock

Flextool Trowel Blade Finish 150X325MM (4PK) FT-D34-3 FT201823-UNIT FT34-2 is a robust, reliable and safe concrete power finishing machine. It‚¬„¢s...

View full details
Original price $51.50 - Original price $51.50
Original price
$51.50  +GST
$51.50 - $51.50
Current price $51.50  +GST

OX Trade Style 4 Combination Blades (Set of 4)

OX Tools
Original price $85.96 - Original price $85.96
Original price
$85.96  +GST
$85.96 - $85.96
Current price $85.96  +GST
In stock

Suitable for 34" machines 16 x replacement square head bolts and locking nuts included Heat treated - for better wear No. of Threaded Holes ...

View full details
Original price $85.96 - Original price $85.96
Original price
$85.96  +GST
$85.96 - $85.96
Current price $85.96  +GST

Masterfinish by A.G.Pulie 36" Plastic Finishing Blade PL0090

MasterFinish by AG Pulie
Original price $235.45 - Original price $235.45
Original price
$235.45  +GST
$235.45 - $235.45
Current price $235.45  +GST
In stock

Masterfinish by A.G.Pulie 36" Plastic Finishing Blades (6" X 14") Specifications: Plastic finishing blades to suit 36" walk behind and ride on tro...

View full details
Original price $235.45 - Original price $235.45
Original price
$235.45  +GST
$235.45 - $235.45
Current price $235.45  +GST

Masterfinish by A.G.Pulie 48" Clip On Float Blades BF48B

MasterFinish by AG Pulie
Original price $154.55 - Original price $154.55
Original price
$154.55  +GST
$154.55 - $154.55
Current price $154.55  +GST
In stock

Masterfinish by A.G.Pulie 48" Clip On Float BladesFeatures: Clip on float blades designed to fit 46" machines Blades will clip over 46" finishing b...

View full details
Original price $154.55 - Original price $154.55
Original price
$154.55  +GST
$154.55 - $154.55
Current price $154.55  +GST

Masterfinish by A.G.Pulie 36" Clip On Float Blades BF36B

MasterFinish by AG Pulie
Original price $136.36 - Original price $136.36
Original price
$136.36  +GST
$136.36 - $136.36
Current price $136.36  +GST
In stock

Masterfinish by A.G.Pulie 36" Clip On Float BladesFeatures: Clip on float blades designed to fit 36" machines Blades will clip over 36" finishing b...

View full details
Original price $136.36 - Original price $136.36
Original price
$136.36  +GST
$136.36 - $136.36
Current price $136.36  +GST

Hoppt 36" Set of 4 Trowel Blades Finishing - Metric Thread - TB36FM

Hoppt Construction Equipment
Original price $70.00 - Original price $70.00
Original price
$70.00  +GST
$70.00 - $70.00
Current price $70.00  +GST
In stock

Hoppt Set of 4 Trowel Blades - 36" Finishing - Metric Thread Bolts IncFinishing blades are designed to achieve a smooth polished surface

Original price $70.00 - Original price $70.00
Original price
$70.00  +GST
$70.00 - $70.00
Current price $70.00  +GST

Hoppt 36" Set of 4 Trowel Blades Finishing - Imperial Thread - TB36F

Hoppt Construction Equipment
Original price $70.00 - Original price $70.00
Original price
$70.00  +GST
$70.00 - $70.00
Current price $70.00  +GST
In stock

HOPPT 36" Set of 4 Trowel Blades Finishing Hoppt Set of 4 Trowel Blades - 36" Imperial Thread No Bolts

Original price $70.00 - Original price $70.00
Original price
$70.00  +GST
$70.00 - $70.00
Current price $70.00  +GST

Marco Pesaro 300mm x 112mm Wood Float Concrete Teak - MP801

Marco Pesaro
Original price $36.29 - Original price $36.29
Original price
$36.29  +GST
$36.29 - $36.29
Current price $36.29  +GST
In stock

Marco Pesaro Float 300mm x 112mm Concrete Teak MP801 Features: 300mm x 115mm Teak Float

Original price $36.29 - Original price $36.29
Original price
$36.29  +GST
$36.29 - $36.29
Current price $36.29  +GST

Marco Pesaro 465mm X 60mm Teak Float Hard Wood Soft Grip Handle - MP804

Marco Pesaro
Original price $32.03 - Original price $32.03
Original price
$32.03  +GST
$32.03 - $32.03
Current price $32.03  +GST
In stock

Marco Pesaro 465mm x 60mm Concrete Teak Float MP804 Features: 465mm x 60mm Concrete Teak Float Type: Teak Float

Original price $32.03 - Original price $32.03
Original price
$32.03  +GST
$32.03 - $32.03
Current price $32.03  +GST

Marco Pesaro 380mm x 115mm Float Concrete Teak - MP802

Marco Pesaro
Original price $28.61 - Original price $28.61
Original price
$28.61  +GST
$28.61 - $28.61
Current price $28.61  +GST
In stock

Marco Pesaro Float 380mm x 115mm Concrete Teak MP802 Features: Size: 380x115mm Type: Teak Float

Original price $28.61 - Original price $28.61
Original price
$28.61  +GST
$28.61 - $28.61
Current price $28.61  +GST

Marco Pesaro 280X140 mm Hydro Sponge Float Profile Cut - MP586

Marco Pesaro
Original price $25.58 - Original price $25.58
Original price
$25.58  +GST
$25.58 - $25.58
Current price $25.58  +GST
In stock

Marco Pesaro Render Float Diamond Slotted Pattern Hydro Sponge Features: 280mm x 140mm x 30mm Plastic Handle Diamond Slotted Pattern Well suited...

View full details
Original price $25.58 - Original price $25.58
Original price
$25.58  +GST
$25.58 - $25.58
Current price $25.58  +GST

Marco Pesaro 220mm Splash Trowel Soft Grip - MP220

Marco Pesaro
Original price $22.97 - Original price $22.97
Original price
$22.97  +GST
$22.97 - $22.97
Current price $22.97  +GST
In stock

Soft Grip Finger Guard Handle 220mm Long 120mm Heel 88mm Nose

Original price $22.97 - Original price $22.97
Original price
$22.97  +GST
$22.97 - $22.97
Current price $22.97  +GST

Compare products

0 of 3 items selected

Select first item to compare

Select second item to compare

Select third item to compare

Compare